beautypg.com

Shure A33LK User Manual

Features, What’s included, Specifications

background image

Features

Use the A33LK kit to connect a Shure FP24 to a Shure

FP33 mixer. Combining an FP24 and a Shure FP33 (or
FP32A) mixer yields a flexible, cost-effective, 5 X 2 field mix-
ing setup with the following features:

S

Simultaneously accepts a stereo microphone, hard-wired
shotgun, and two RF lavalier microphones.

S

48-volt phantom power for all five microphone inputs

S

Limiters on the FP24 inputs

S

Input assignment switches on the FP24 and pan pots on the
FP33 inputs

S

Two output buses—assignable to mic or line level output.

S

Master volume and headphone monitoring for all five inputs
controlled from the FP33.

S

Compact—FP24 adds little bulk to an existing FP33
package.

S

The FP24’s isolated external DC input jack eliminates
ground related interference problems.

NOTE: The A33LK kit can also be used with the Shure FP23
to create a 4 X 2 setup.

What’s Included

S

One “Y” cable (XLR to 3-Pin Mini Connector)

S

Two four-inch strips of 5/8” Velcro.

Specifications

Connectors

XLR 3-pin female to 3-Pin Mini Connector (TA3F)

Shipping Weight

170 grams (6 Oz.)

Dimensions

Length: 12.5”

SHIELD

R

L

12.5”

RED

BLACK

1

2

3

3-PIN MINI CONNECTOR

DIMENSIONS

1

2

3

1

1

2

2

3

3

820 ohm

820 ohm

FP24 XLR–L

FP24 XLR–R

FP33 MIX BUS

WIRING DIAGRAM

NOTE: When interconnecting the FP24 and FP33, inputs from

the FP24 appear at the FP33 mixbus with their polarity reversed.
(This is unavoidable due to the nature of the interconnection.) To
avoid cancellation or interference effects (e.g., comb filtering) be-
tween the signals from the FP24 and FP33 inputs, use Shure
A15PRS polarity inverters on the FP24 inputs, or do one of the fol-
lowing:

S

Keep microphones connected to the FP24 as far away as
possible from those connected to the FP33.

S

For microphones that must be close together (such as those
in a stereo pair), connect them to the same mixer.

Instructions for Use

Connect the balanced, line level XLR outputs of the FP24 to the

MIX BUS of the FP33 using the “Y” cable as shown. The red XLR
connector goes to the right channel.

Model A33LK User Guide

FP33 Channel Expansion Cable

SHURE Incorporated Web Address: http://www.shure.com
5800 W. Touhy Avenue, Niles, IL 60714–4608, U.S.A.
In U.S.A. Phone: 1-847-600–2000 Fax: 1-847-600-1212
In Europe, Phone: 49-7131-72140 Fax: 49-7131-721414
In Asia, Phone: 1-852-2893-4290 Fax: 1-852-2893-4055
International Fax: 1-847-600-6446

27A8749 (Rev. 1)

2001, Shure Incorporated

Printed in U.S.A.