Samsung sf 150 - Manual (Page 45)

S
PECIAL
F
EATURES
4.10
C HAPTER F OUR : S PECIAL F EATURES
4
5
When the desired option
appears in the LCD, press
Start/Copy.
Now, you can set each
option by following the
instructions below.
Start/
Copy
Stop
Help
8 9
0
Options You Can Choose
These instructions assume youÕve followed the steps above under ÒSetting an optionÓ
and the machine is asking if you want to change one of the options listed here.
¥ Confirmation report - You can set the fax machine to automatically print out a
confirmation report every time you send a fax. The report shows whether your fax
went through or not. It also tells you how many pages were sent, and so on.
Choose YES to print out a confirmation report automatically each time you send a fax.
Choose ERROR to print out a confirmation report automatically only when there is an
error.
Choose NO to disable this feature.
Press Start/Copy when you selected a variable which you want.
¥ Dial type - Select TONE (MF) or PULSE (DP) dial mode to match the type of service
you have.
Press Start/Copy when you selected a variable which you want.
¥ Ring count - Select the number of times your machine rings before answering an
incoming call. If you are using your machine as both a telephone and a fax machine,
we suggest you set the ring count to at least 4 to give you time to answer.
Enter a number on the number keypad, then press Start/Copy.
¥ Remote receive code - The remote receive code allows you to initiate fax receive from a
phone extension connected to the same line as your fax machine. If you pick up the
phone extension and hear fax tones, you can enter the remote receive code and the fax
will start receiving. The password is preset to Т*9*У (star nine star) at the factory.
The *Õs are fixed, but you can change the middle character to any digit from 0 to 9.
Enter the number you want to use, then press Start/Copy.
¥ Auto print - The fax machine keeps records of communications. You can get a
transmission or reception journal printout manually or automatically.
Choose YES to print out a communication (send and receive) journal automatically.
Choose NO to disable this feature.
Press Start/Copy when you selected a variable which you want.
¥ Modem speed - You can select the modem speed. Choose 48 for 4800 bps or 96 for 9600
bps.
Press Start/Copy when you selected a variable which you want.
Ch-4 3/25/98 6:32 PM Page 11