Additional tasks when playing back messages, Playing back messages (continued) – Sony SPP-A9276 User Manual
Page 64
Answering Machine Features
64
US
Notes
• The display shows the total number of “new” messages. Therefore, it is reset
to “00” when you play back all new messages, even they are not erased yet.
Be sure to erase unnecessary messages before the memory becomes full.
Confirm the available time left for recording in the standby mode display.
• The phone can record up to 128 messages including the greeting and memo.
• If a call comes in during playback, the playback stops.
Tips
• You can also listen to the messages or erase the messages from a outside
phone (page 69).
• During playback of messages with Caller ID data, the name and phone
number will appear on the display. If there is no name and phone number
data, “NO CALLER ID” will appear on the display.
During playback of memo, “MEMO MESSAGE” will appear on the display.
Additional tasks when playing back messages
To
Do this
Adjust the answering volume During playback, press (VOLUME) (+) or (-)
on the base phone.
Adjust the cordless handset
Set the VOL switch on the cordless handset to
volume
H (high), M (middle) or L (low).
Stop playback
Press (PLAY/STOP) on the base phone or (OFF)
on the cordless handset.
Skip to the next message
Press > SKIP (3) while the current message
is playing.
Repeat the current message
Press . REPEAT (1) while the current
message is playing.
Go back to previous messages Press . REPEAT (1) within the first three
seconds of the current message.
Review playback
Keep REVIEW (4) pressed during playback.
Play back quickly
Keep QUICK (6) pressed during playback.
Playing back messages (continued)