Sharp UX-P400 - Manual (Page 79)

Messages and Signals
77
9. T
roub
le
-
s
hooti
n
g
LINE ERROR Transmission or reception was not successful. Press
the STOP key to clear the message and then try
again. If the error persists, see Line Error on page 71.
MEMORY IS FULL/
SEE MANUAL
(alternating messages) The memory is full. This may occur during fax
reception if too much data is received before the
pages can be printed out. If faxes have been received
to memory because printing is not possible (an
additional message will indicate the problem), resolve
the problem so that printing can continue (see
Substitute Reception to Memory on page 48). If you
are attempting to transmit from memory, see If the
memory becomes full on page 38. If you are copying,
see If MEMORY IS FULL appears on page 49.
MEMORY PRINTING The fax is preparing to or printing out a document
from memory.
NO DATA This appears if you attempt to search for an auto-dial
number when none have been stored.
OFF HOOK This appears if you forgot to replace the handset after
using it to dial and send a fax. Replace the handset or
press the STOP key to clear the message.
ON HOOK DIAL
The key has been pressed and the fax machine is
waiting for you to dial.
OVER HEAT The print head has overheated. Operation can be
continued after it cools. If overheating frequently
occurs, try changing the print contrast setting to
LIGHT (see page 15).
PRINT HEAD FAIL/
YOU NEED SERVICE
(alternating messages) The print head has failed and requires service.
READY TO SEND A document has been loaded and the fax machine is
waiting for you to begin faxing or copying.