Samsung iDCS500 - Manual (Page 10)

Samsung iDCS500 SLT User Guide
–4–
EXTERNAL CALLS
MAKING AN EXTERNAL CALL
1. Lift the handset and listen for internal dial tone.
2. Dial a C.O. line or line group access code.
3. Listen for external dial tone and dial the telephone number.
4. Finish the call by replacing the handset.
If your system is programmed to require an authorisation code before making a call:
1. Dial
∗ and a valid code. You will hear transfer tone.
2. Press Recall and select a C.O. line.
If your system is programmed to require an account code before making a call:
1. Dial 47 and a valid code.
2. Press Recall and listen for transfer tone. Select a C.O. line.
For advice on authorisation and account codes, see your system administrator.
ANSWERING AN EXTERNAL CALL
1. Lift the handset. You are automatically connected to the ringing call.
2. Finish the call by replacing the handset.
UNIVERSAL ANSWER
Outside lines may be programmed to ring a general alerting device. To answer calls
ringing this device, dial 67. This device can operate in any ring plan mode.
SENDING A FLASH
While you are on an external call, press Recall, listen for transfer tone and dial 49
to send a flash to the Telephone Company. This may be required for some custom
calling features or CENTREX lines.