Sharp MX-M850 - Manual (Page 613)

43
Detect Standard in Auto Color
Mode
(When the color expansion kit is installed.)
When the color mode is set to auto in image send mode,
the discrimination point for detecting whether originals
are color or black and white can be set to one of 5 levels.
To make it easier to detect a black and white original,
adjust the setting toward [Closer B/W]. To make it easier
to detect a color original, adjust the setting toward
[Closer color].
Double Feed Detection Setting
(MX-M950/M1100 only)
When this function is enabled, a detection function will
activate, feeding will stop, and a message will appear if a
paper or original double-feed occurs. In this event, follow
the instructions in the message.
This function can be enabled separately for the
automatic document feeder and for each tray.
Status Indicator Setting
The illumination pattern when the status indicator is
green can be specified. Select pattern 1 or pattern 2.
Pattern 1
Solidly lit: Paper feeding or output
Blinking: Scanning
original
Off: Standby
Pattern 2
Solidly lit: Ready to receive job
Blinking:
Processing job (scanning original, paper
feeding, output)
Off: Not ready to receive job
Optimization of a Hard Disk
This function optimizes the hard drive of the machine by
defragmenting data. If a job is in progress, a message
will appear and optimization will not begin until the job is
finished. During optimization, the following operations
are not possible:
• Web page access, reception of print data
• Use of keys on the operation panel
• Turning off the power with the main power switch of
the machine.
• Auto Power Shut-Off
When optimization is completed, the machine will
automatically restart.
Clear All Job Log Data
This is used to clear the entire job log. (There is normally
no need to use this function.)
A log file is kept of jobs run on the machine. The job log
can be used to check general use of the machine. The
job log can be written to a computer in CSV format using
a Web browser.
• The detection function does not operate when
transparency film or label sheets are used.
• When media with a special coating is used, the
detection function may activate even though a
double-feed has not occurred.
When the document filing function is frequently used
and output of files seems somewhat slow, optimizing
the hard drive may improve performance.