Sony HVL-F42AM - Manual (Page 42)

GB 42
5
Make sure that the built-in flash and flash unit are fully
charged.
• “ ” is lit in the viewfinder when the built-in flash is fully charged.
• When the flash unit is fully charged in the wireless flash mode, the AF
illuminator on the front blinks, and the TEST button is lit in amber.
6 Use test flash to check the flash.
• The test flash method differs depending on the camera used. For details,
refer the operation instructions of your camera.
• If the test flash does not work, change the position of the camera, flash or
subject.
7
Check again that the built-in flash and the flash unit are
fully charged, and press the shutter button to take the
photo.