Sharp UX-B700 - Manual (Page 26)

Connecting the Telephone Line Cord
24
Connecting the Telephone Line Cord
Insert one end of the line cord into the jack on the back of the machine
marked TEL. LINE. Insert the other end into a standard (RJ11C) single-line
wall telephone jack.
Setting the dial mode
The fax machine is set for tone dialing. If you are on a pulse dial line, you must
set the fax machine for pulse dialing. Press the panel keys as follows:
1
Press once and 3 times.
2
Press once and 4 times.
3
Press once.
4
Select the dial mode:
TONE: PULSE:
5
Press to exit.
FUNCTION
1 2
STOP
Display:
The display briefly shows
your selection, then:
OPTION SETTING
DIAL MODE
QUIET TIME
1=TONE, 2=PULSE
TEL.LINE
L.SET