Sharp UX-CD600 - Manual (Page 11)

9
Display
This displays messages and prompts to help you operate the machine.
MIC
The microphone is located here. Speak toward MIC when using the
speakerphone or when recording an outgoing message or memo.
UP and DOWN arrow keys
Enlarge/reduce setting: When making a copy of a document, press these
keys to select an enlarge/reduce setting (page 105).
Volume setting: When a document is not in the feeder, press these keys to
change the handset volume when the handset is lifted, the speaker volume
when the SPEAKER key has been pressed, or the ringer volume at any other
time (page 39).
FUNCTION key settings: Press these keys after pressing the FUNCTION
key to scroll through the FUNCTION MODE settings.
Line 1 key
Press this key to select line 1 when making a call from the machine or sending
a fax (pages 59 and 86).
Line 2 key
Press this key to select line 2 when making a call from the machine or sending
a fax (if you have connected a second line to the machine) (pages 59 and 86).
Panel release
Press this release to open the operation panel.
STOP key
Press this key to cancel an operation before it is completed.
COPY/HELP/POLL key
When a document is in the feeder, press this key to make a copy of a
document (page 105). When a document is not in the feeder, press this key to
print out the Help List, a quick reference guide to the operation of your fax
machine. This key is also used after dialling to poll (request fax transmission
from) another machine (page 114).
START/MEMORY key
Press this key after dialing to begin fax transmission (page 86). Press this key
before dialing to send a fax through memory (page 95). The key can also be
pressed in the date and time display to show the percentage of memory
currently used.
12
11 11
10
9
13
14
8
6
7
all.book 9 ページ ２００４年６月２２日 火曜日 午後１２時１分