Samsung STB-496PPV - Manual (Page 4)

7 SPEED DOME CAMERA ACCESSORIES 6 SPEED DOME CAMERA ACCESSORIES
Installation Guide Installation Guide
Pull the connection cable out of the wall type mount
through the hole in advance.
Cautions
1. Using the four screws that are enclosed, fix the STH-
270PWV wall mount onto the wall on the right hand
side of where the speed dome camera is to be
installed.
2. Pull the safety cable that is fixed to the housing outside of the housing.
3. Before installing the product on the mount, open the dome cover for the housing of the
outdoor speed dome and align the direction of the arrow for the camera holder with the
housing base, then fix it using the screws enclosed.
4. Connect the safety cable from the housing to the internal fixture ring of the STH-270PWV wall
mount.
5. Insert the cable into the housing and fit the housing into the internal groove of the wall mount,
making sure that the Samsung logo is facing the front.
STH-1000PO (Outdoor Housing)
Check the the safety cablesafety cable connection. If the safety cable is not connected, it may cause
injury or damage to the product.
Cautions