Samsung SV-6313X - Manual (Page 13)

GB
23 22
RE C UD IO
SP EE D
TV/VCR
OK
Selecting the Cassette Type
If you wish to use the tape counter to display the time remaining on
a cassette, you must indicate the type of cassette inserted.
1 Press MENU on the remote control.
Result:
The programming menu is displayed.
2 Press the corresponding " , ❷! or ➛ , ❿ buttons to select the
FUNZIONI option.
3 Press the OK button to select this option.
4 Press the corresponding " or ❷ buttons, until the cursor is
placed in front of the DURATA NASTRO option.
5 Press the ➛ or ❿ buttons as many times as required, until the
correct cassette length is displayed.
E180 E240
E 300 E260
6 Press MENU twice to exit the menu.
Selecting the Recording Speed
★
(SV-635X/SV-631X/
SV-6315X/SV-6313X/SV-530X/SV-435X/SV-431X Only)
Type Recording Time (in SP)
E-180 180 mins. or 3 hours
E-240 240 mins. or 4 hours
E-260 260 mins. or
4 hours and 20 mins.
E-300 300 mins. or 5 hours
You can record a cassette at two different speeds:
◆ SP (Standard Play)
◆ LP (Long Play)
In Long Play modes:
◆ Each cassette lasts twice as long
◆ The recording is of a slightly lower quality
To record a cassette... Press the SPEED button on the
remote control, until...
In standard play mode SP is displayed.
In long play mode LP is displayed.
The TV/VCR button allows you to record one channel with the VCR
while you watch another channel on the TV.
When the VCR indicator is... Your television...
On The television receives the picture from
the VCR and you can select channels
with the PROG/TRK (
" or ❷ ) / PROG
( " or ❷ ) buttons on the VCR or the
remote control.
Off (or the VCR is turned off) The television receives the picture from
your home aerial or cable television
system as it did before you connected
the VCR.
You can then use the programme (
" or
❷ ) buttons on your television to select
the channels.
To switch the VCR indicator on and off, simply press the TV/VCR button.
Setting the AV2 Connection
If you wish to use the AV2 socket for a PAY TV DECODER, you
must change AV2 to the required position.
1 Press MENU on the remote control.
Result:
The programming menu is displayed.
2 Press the corresponding " , ❷! or ➛ , ❿ buttons to select the
INSTALLAZIONE option.
3 Press the OK button to select this option.
Result:
The INSTALLAZIONE menu is displayed.
4 Press the corresponding " or ❷ buttons, until the cursor is
placed in front of the SELEZIONE AV2 option.
5 When... Press ➛ or ❿ , until...
Another VCR or Satellite EXT is displayed.
receiver is connected to
the AV2(DECODER/EXT.) socket
The decoder is connected to DEC is displayed.
the AV2(DECODER/EXT.) socket
6 On completion, press MENU twice to exit the menu.
RE
C
MENU
AU DIO
SP EE D
TV/VCR
REPEAT
OK
Switching between the TV and VCR Modes
INSTALL
SINTONIA AUTOMATICA
SINTONIA MANUALE
STANDARD TV :G
CANALE VCR OUT :CH36
❿ SELEZIONE AV2 :DEC
" ❷ ❿ USCITA: MENU
INSTALL
SINTONIA AUTOMATICA
SINTONIA MANUALE
CANALE VCR OUT :CH36
❿ SELEZIONE AV2 :DEC
" ❷ ❿ USCITA: MENU
★ (SV-530X/SV-435X/SV-431X/SV-235X/
SV-231X/SV-2315X/SV-2313X)
★ (SV-635X/SV-631X/SV-6315X/SV-6313X)
★ (SV-530X/SV-435X/SV-431X/SV-235X/
SV-231X/SV-2315X/SV-2313X)
★ (SV-635X/SV-631X/SV-6315X/SV-6313X)
OPTIONS
MENU :SI
❿ DURATA NASTRO :E180
NORMA COLORE
:AUTO
IPC :SI
16:9 :AUTO
NICAM :SI
" ❷ ❿ USCITA: MENU
OPTIONS
MENU :SI
❿ DURATA NASTRO :E180
NORMA COLORE
:AUTO
IPC :SI
16:9 :AUTO
" ❷ ❿ USCITA: MENU