Sceptre Technologies X32 - Manual (Page 71)

SCEPTRE X32 HDTV User Manual
- 71 -
www.SCEPTRE.com
5. SETUP CODE – This subfunction sets the password.
a. Press MENU to open the OSD and highlight FUNCTION by pressing
the ▼ button.
b. Press
↵
or ► to select the functions and highlight AUTO LOCK.
c. Press
↵
to select the function.
d. Press ▼ until you see SETUP CODE and use
↵
to select it.
e. Input “0000” as your password and input your new password.
Please Note :
• There is no way of resetting the password.
• If you’re going to change the password, please write it down
and keep it in a safe place just in case you forget.