Samsung 5400 - Manual (Page 116)

116 Handbook
|
15 USER LANGUAGE
16 INCOMING RING
17 REMOTE RECEIVE
18 MEM./FEEDER SW.
19 NOT USED
20 ECM FUNCTION
21 REMOTE DIAGNOSIS
22 PC/FAX SWITCH
23 ONE TOUCH PARAM
Message Confirmation Report (MCF)
What is it?
This report provides information about your last single-
location fax transmission or polling transmission.
What information does it provide?
• The date of the communication.
• The total amount of time spent Sending or Receiving (S,
R-TIME).
• The Location ID or telephone number of the fax machine
you were communicating with (DISTANT STATION ID).
• The communication mode used (Communication Codes).
• The number of pages sent or received.
• The result of the communication (Results Codes)
• Service codes. Be sure to report these diagnostic codes if
you contact your Authorized Service Dealer about
communication problems.
• If the fax was transmitted from memory (not directly from
the feeder), a portion of the first page prints after the
report. If you do not want this portion of the first page to
print, set User Function 04, Image in MCF, OFF. Refer to
the “Setting Basic Features, User Function Settings”
section of this handbook.