Sanyo SCP-2300 - Manual (Page 47)

Headset Mode
This feature allows you hands-free phone use. Set the headset
mode to Voice Call or 10-4 and press the Turbo Button (the
operation button) on the headset to activate useful functions.
To connect the headset:
ᮣ Simply plug the headset into your phone’s headset jack.
To set headset mode:
1. Press to access the main menu.
2. Highlight Settings and press .
3. Highlight Others and press .
4. Highlight Headset Mode and press .
5. Select Voice Call or 10-4 and press .
ᮣ To deactivate this feature, select Off during step 5 above.
With the headset:
ᮣ Voice Call: Press the Turbo Button to activate Voice dial.
Press twice to redial the last call. Press and hold the button to
activate the Voice Memo.
ᮣ 10-4: Press and hold the Turbo Button to redial the last
10-4 call.
Tip: For an explanation of the Headset Mode setting, press (right
softkey) during step 5 above.
Note: If your headset doesn’t have a Turbo Button, set headset mode to Off.
Note: When using the headset, DO NOT set the volume too high.
Listening at high volume for an extensive period of time may cause
hearing loss.
Info
41