Simplicity 1693647 555M - Manual (Page 29)

25
ENGINE
Make ................................................................Tecumseh
Cylinders........................................................................1
Cycles.............................................................................4
Crankshaft .......................................................Horizontal
5 HP (555M)
- Model No. .....................................See engine I.D. plate
- Bore & Stroke.................................2.795 in. x 1.937 in.
(70.99 mm x 49.20 mm)
- Displacement .............................................11.88 cu. in.
(195 cc)
7 HP (755E)
- Model No. .....................................See engine I.D. plate
- Bore & Stroke.................................2.795 in. x 1.937 in.
(70.99 mm x 49.20 mm)
- Displacement .............................................11.88 cu. in.
(195 cc)
Ignition ...............................................................Magneto
Governor........................................................Mechanical
Choke ...................................................................Manual
Lubrication ...............................................Splash system
Oil Capacity ......................................See engine manual
Fuel Capacity....................................See engine manual
DRIVE
Type ..............................................Traction Drive w/chain
and speed selection
Speeds ...............................Five forward and two reverse
Axle...........................................................................Solid
Tire Inflation ..........................................20 psi (136 kPa)
AUGER HOUSING
Construction..............................Welded steel stampings
Effective Width ..........................................22 in. (55 cm)
Auger Opening Height
with Extension........................................16.5 in. (42 cm)
Chute Rotation ........................................................192 O
Scraper Bar ......................................Wear resistant steel
Skid Shoes ........................Adjustable, heat-treated steel
AUGER
Construction.............................Ribbon flite welded steel
Bearings .........Ultra high Molecular Weight Polyethylene
IMPELLER
Construction..............................................4 steel blades
Bearings ..............Pre-lubricated and sealed ball bearing
Diameter..................................................10 in. (25.4 cm)
OVERALL DIMENSIONS & WEIGHT
Length ......................................................51 in. (132 cm)
Width ..........................................................24 in. (61 cm)
Height.................................................43-1/2 in. (110 cm)
Weight
555M ........................................................158 lbs. (72 kg)
755E .........................................................178 lbs. (80 kg)
SPECIFICATIONS ARE CORRECT AT TIME OF PRINTING
AND ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Specifications