Sennheiser EM 3731 User Manual
Instructions for use
This manual is related to the following products:
Table of contents
Document Outline
- Important safety instructions
- Delivery includes
- The EM 3731/3732 receiver family
- Overview of operating controls
- Overview of the display
- Indications and displays
- Putting the receiver into operation
- Fitting the device feet
- Rack mounting
- Connecting the antennas
- Daisy chaining receivers
- Connecting the receiver to the mains/disconnecting the receiver from the mains
- Connecting the amplifier/mixing console
- Connecting devices with AES3 digital input
- Connecting an external word clock generator
- Connecting the receivers to a PC via Ethernet
- Using the receiver
- The operating menu
- Overview of menus
- Working with the operating menu
- Operating menu of the receivers
- Adjustment tips for the operating menu
- Setting the receiving frequency
- Selecting a frequency bank and a channel
- Changing the receiving frequency for a selected channel in the frequency bank “U”
- Entering a name
- Adjusting the squelch threshold
- Switching the booster supply voltage on/off
- Adjusting the audio output level
- Selecting the sampling rate for digitalization
- Configuring the audio outputs of the EM 3732 Command twin receiver
- Changing to the extended menu
- Scanning the frequency banks for interference-free channels
- Displaying a list of all free channels
- Starting the scan
- Releasing channels that are used or subject to interference
- Multi-channel operation
- Selecting the status display
- Changing the IP address
- Displaying the network address (MAC address)
- Setting a receiver to standby mode
- Loading the factory-preset default settings
- Additional information
- Specifications
- Accessories/spare parts
- Manufacturer Declarations