Sony ICD-SX800 - Manual (Page 13)

ICD-SX700/SX800 4-127-580-12(1)
13
GB
If you press  (record/pause) to
pause recording when “VOR” is set to
“ON” in the menu, only “ ” flashes.
: Synchronized recording
: Flashes while
synchronized recording is set to
pause.
 Recording level meter
 Recording level indicator
Displays the current microphone
sensitivity when recording.
: To record for dictation or in a
noisy place.
: To record at a meeting or in a
quiet/spacious place.
: To record with further high
sensitivity.
: To record music.
Displays the recording level during
manual recording.
 Elapsed recording time/Pre-recording
standby time indication
If more than 100 hours have elapsed
since start of the recording, the time
is displayed in hours and minutes.
If less than 100 hours have elapsed
since start of the recording, the time
is displayed in hours, minutes and
seconds.
When “PRE REC” is set to “ON” in the
menu, the pre-recording standby
time is displayed in seconds between
0 and 5.
 Alarm indicator
 Recoding mode indicator
Displays the recording mode set in
the menu.
 Limiter indicator
: When “LIMITER” is set to “ON”
in the menu.
: When you are recording in
other than the manual recording
mode.
 Remaining recording time indication
 Battery indicator
 LCF (Low Cut Filter) indicator
: When “LCF (LOW CUT)” is set
to “ON” in the menu.
: When “LCF (LOW CUT)” is set
to “OFF” in the menu.