Smeg WM40T-1 - Manual (Page 24)

FAILURE PROBABLE CAUSE
METHODS OF
ELIMINATION
The spining process is
not done or starts with
delay .
No failure. The
unbalanced load
control may works in
that way.
The unbalanced load
control system will try
to distribute your
clothes in a
homogenous manner.
After your clothes are
distributed, passage to
spining process will be
realized.In the next
washing process,place
your clothes into the
machine in a well-
balanced manner.
SECTION 9: AUTOMATIC FAILURE DETECTION SYSTEM
Your machine is equipped with systems which will both take the necessary
precautions and warn you in case of any failure by controlling it self constantly
during the washing processes.
FAILURE
CODE FAILURE
INDICATOR
PROBABLE
FAILURE
THE PROCESS
TO BE DONE
Err 01
The start/pause
light blinks. The door is not
shut properly.
Shut the door
properly so that
you hear the
click. If the
problem
persists, turn off
the machine
unplug and
apply to the
nearest
authorized
service
immediately.
51