Sharp UX-S10 - Manual (Page 30)

Setup for SMS Test Messaging
28
1
Press once and once.
2
Press once and once.
3
Press .
4
Press to select ON.
(To turn off the function, press .)
5
Press to return to the date and time display.
SMS
1
2
STOP
Display:
1=ON, 2=OFF
The display briefly shows
your selection, then:
SMS SETTING
SMS RECEIVE
SMS CARRIER
Setup for SMS Test Messaging
To use your fax machine to send and receive SMS messages, you must first
turn on the SMS Receive function, enter the number of your SMS center (if
you are using a carrier other than ANNY WAY), and select which carrier you
wish to use to send messages.
Turning on the SMS Receive function
The SMS Receive function is initially turned on. If you need to change the
setting, follow these steps. (Note: Turning off this setting only turns off SMS
message reception. SMS message transmission is still possible.)