Sony NAC-SV10I User Manual
Page 44
44
GB
Listening to audio content from an external
component (Audio In)
You can listen to the playback sound from an
external component (such as a portable music
player, etc.) connected to the AUDIO IN jack on
the unit.
Use an audio connecting cable (optional) to
connect the AUDIO IN jack on the unit and the
audio output jack on the external component.
Make sure the audio connecting cable is firmly
inserted into both jacks. If not, noise may be
generated in the sound output.
1
Set the source selector on the
amplifier to the setting for this unit.
2
Turn the volume of the connected
amplifier down to its lowest level.
When the unit is connected to the Sony
amplifier, press AMP VOL – on the remote
control. For details on the remote control
settings required to operate the Sony
amplifier, see “Setting up the Sony amplifier”
(page 19).
3
Connect an external component to
the AUDIO IN jack on the unit
using an audio connecting cable.
4
Press FUNCTION repeatedly to
select the AUDIO IN function.
5
Start playback of the connected
component and adjust its volume.
Playback sound is output from the connected
amplifier. For details on the operation of the
connected component, refer to the operating
manual of the connected component.
To adjust the input level
If the sound volume is too high or too low, you can
change the input level on the unit according to the
output level of the connected component.
1
While the AUDIO IN function is
selected, press OPTIONS to enter
the options menu and select “AUDIO
IN Sensitivity.”
2
Select “Low(Line Out)” or
“High(Headphone Out).”
(
: Factory setting)
Note
When the volume from an external component is too low,
set the input level to “High(Headphone Out).” When the
volume is too high or the sound is distorted, set the input
level to “Low(Line Out).” Use the volume adjustment
control if the connected component has a volume
adjustment function.
AUDIO IN jack
Display
Description
Low(Line Out)
When the unit is
connected to the line
out jack of the external
component.
High(Headphone
Out)
When the unit is
connected to the
headphone out jack of
the external component.