Samsung CLX-3175FN - Manual (Page 42)

42 _ Loading originals and print media
6. Slide the tray 1 back into the machine .
7. After loading paper, set the paper type and size for the tray. See "Setting
the paper size and type" on page 43.
The tray is preset to Letter or A4 size, depending on your country. To
change the size to A4 or Letter, you must adjust the lever and paper width
guide properly.
1 Pull the tray out of the machine. Open the paper cover and remove
paper from the tray if necessary.
2 If you want to change the size to Letter, hold the lever at the back of the
tray, and rotate the lever clockwise.
3 Squeeze the paper width guide and slide it to the edge of the lever.
• Due to insufficient paper in the tray, the paper length guide can be
pushed to inside, load enough paper.
• If you experience problems with paper feed, load a paper into the
tray one by one.
• You can load previously printed paper. The printed side should be
facing up with an uncurled edge at the front. If you experience
problems with paper feed, turn the paper around. Note that print
quality is not guaranteed.
If you want to change the size to A4, first move the paper width guide
to left and rotate the lever counterclockwise. If you force the lever, it
could damage the tray.