Typisches setup, Deut sche, S phantom bedienen – Samson S. phantom S Class User Manual
Page 16
DEUT
SCHE
16
Typisches Setup
Das folgende Diagramm zeigt
ein typisches Setup für ein
Projektaufnahmestudio, wobei
zwei Kondensatormikrofone
mittels S phantom an einen
Personal Harddisk-Recorder
angeschlossen sind, der keine
Phantomspannung bereitstellt.
Hinweis: Man kann entweder den
XLR- oder 1/4"-Klinkenausgang
für Mic 1 verwenden, was in der
Abbildung durch eine gepunktete
Linie dargestellt wird.
Die S phantom ist zusätzlich als
1-auf-2 Mikrofonsplitter einsetz-
bar, indem man die XLR- und
1/4"-Ausgänge von Mic1 gleich-
zeitig benutzt.
S Phantom bedienen
S phantom-Verbindung trennen
Gehen Sie schrittweise wie folgt vor, um die Kabelverbindungen des Systems zu trennen.
•
Drehen Sie die Pegelregler bei den Eingangskanälen, an die die S phantom angeschlossen
ist, ganz zurück.
•
Drehen Sie den Master-Pegelregler zurück.
•
Schalten Sie dann die S phantom aus, indem Sie den AC-Adapter entfernen.
- PowerBrite Pro7 (16 pages)
- Pro Rack-Mount Power Distribution PB15 (16 pages)
- C03 (8 pages)
- 3-STRAND Class I Eye Splice (1 page)
- 3-STRAND Class I Long Splice (2 pages)
- 3-STRAND Class I Rope-to-Chain Splice (2 pages)
- 8-STRAND Class I End-for-End Splice (3 pages)
- 8-STRAND Class I Eye Splice (3 pages)
- 8-STRAND Class II End-for-End Splice (3 pages)
- 8-STRAND Class II Eye Splice (3 pages)
- 8x3-STRAND Class II End-for-End Splice (3 pages)
- 8x3-STRAND Class II Eye Splice (3 pages)
- 12-STRAND Class I End-for-End Splice (2 pages)
- 12-STRAND Class I Eye-and-Eye Tail Splice (3 pages)
- 12-STRAND Class I Eye Splice (2 pages)
- 12-STRAND Class I Eye Splice Modified for Quik-Splice (2 pages)
- 12-STRAND Class I Whoopie Sling Modified for Tenex and Tenex-TEC (2 pages)
- 12-STRAND Class II End-for-End Splice (2 pages)
- 12-STRAND Class II End-for-End Splice Modified for Dirty, Used Rope (4 pages)
- 12-STRAND Class II Eye Splice (2 pages)
- 12-STRAND Class II Tuck-Bury End-for-End Splice (3 pages)
- 12-STRAND Class II Tuck-Bury Eye Splice Modified for HMPE (3 pages)
- 12-STRAND Class II Tuck-Bury Eye Splice Modified for Saturn-12 (3 pages)
- 12-STRAND Class II Whoopie Sling Modified for AmSteel and AmSteel-Blue (2 pages)
- 16-STRAND Class I Eye Splice (3 pages)
- DOUBLE BRAID Class I Back Splice (2 pages)
- DOUBLE BRAID Class I End-for-End Splice (4 pages)
- DOUBLE BRAID Class I Eye Splice (4 pages)
- DOUBLE BRAID Class I Eye Splice Modified for Used Rope (4 pages)
- DOUBLE BRAID Class II End-for-End Splice (2 pages)
- DOUBLE BRAID Class II End-for-End Splice Modified for Turbo-37 (4 pages)
- DOUBLE BRAID Class II Eye Splice (3 pages)
- DOUBLE BRAID Class II Eye Splice Modified for TS-II and TS-II Premium (5 pages)
- DOUBLE BRAID Class II Eye Splice Modified for TS-II Turbo (8 pages)
- DOUBLE BRAID Class II Eye Splice Modified for Turbo-37 (5 pages)
- DOUBLE BRAID Class II Tips for Stripping the Cover (4 pages)
- DOUBLE BRAID Special Tips for Splicing Double Braid (1 page)
- DOUBLE BRAID Special Tips for Splicing Double Braid Used Rope (1 page)
- ROUND PLAIT Class I End-for-End Splice (2 pages)
- ROUND PLAIT Class I Eye Splice (3 pages)
- MISCELLANEOUS Lock Stitching, Whipping, and Seizing Procedures (2 pages)
- MISCELLANEOUS Smooth Ice/Flavored Ice Cover Installation (3 pages)
- MISCELLANEOUS Tools Required for Splicing (2 pages)