beautypg.com

Troubleshooting – Samsung DV407AG* User Manual

Page 30

background image

30_

Troubleshooting

PROBLEM

SOLUTION

Shuts off before load is dry

Dryer load is too small. Add more items or a few towels and restart

the cycle.

Dryer load is too large. Remove some items and restart the dryer.

Lint on clothes

Make sure the lint filter is cleaned before every load. With some loads

that produce high amounts of lint, it may be necessary to clean the
filter during the cycle.

Some fabrics are lint producers (for example, a fuzzy white cotton

towel)and they should be dried separately from clothes that are lint
trappers(for example, a pair of black linen pants)

Divide larger loads into smaller loads for drying
Check pockets thoroughly before washing and drying clothes.

Garments still wrinkled after
Wrinkle-Care

Small loads of 1 to 4 items work best.
Load fewer garments.Load similar-type garments.

Odors remain in clothing
after Refresh.

Fabrics containing strong odors should be washed in a normal cycle.

Water drips from nozzle
when Steam-Care starts

This is steam condensation. The dripping water will stop after a short

time.

Sprayed water is not visible
during Steam-Care

Sprayed water is difficult to see when the door is closed

troubleshooting

DV409-02709B_EN.indd 30

2009-07-15 ¿ААь 11:23:51