Sony DAV-DZ175 - Manual (Page 42)

42 US
Presetting Radio
Stations
You can preset 20 FM stations.
1
Press FM.
2
Press and hold TUNING +/– until the
auto scanning starts.
Scanning stops when the system tunes in a
station. “TUNED” appears in the front
panel display. When a stereo program is
received, “ST” also appears in the front
panel display.
3
Press SYSTEM MENU.
4
Press X/x to select “MEMORY.”
5
Press or c.
A preset number appears in the front panel
display.
6
Press X/x to select the preset number
you want.
7
Press .
“COMPLETE” appears in the front panel
display, and the station is stored.
8
Repeat Steps 2 to 7 to store other
stations.
9
Press SYSTEM MENU.
To change the preset number
Select the desired preset number by pressing
PRESET +/– (page 42), then perform the
procedure from Step 3.
Listening to the Radio
Preset radio stations in the system’s memory
first (see “Presetting Radio Stations” (page 42)).
1
Press FM.
2
Press PRESET +/– repeatedly to select
the preset station.
3
Adjust the volume by pressing
VOLUME +/–.
To listen to radio stations when
you know the frequencies
Press D.TUNING in Step 2, press the number
buttons while holding down SHIFT to select the
frequencies, then press
.
To listen to non-preset radio
stations
Use manual or automatic tuning in Step 2.
For manual tuning, press TUNING +/–
repeatedly.
For automatic tuning, press and hold TUNING
+/–. The automatic tuning stops automatically
when the system receives the radio station. To
stop the automatic tuning manually, press
TUNING +/– or x.
If an FM program is noisy
If an FM program is noisy, you can select
monaural reception. There will be no stereo
effect, but reception will improve.
1
Press SYSTEM MENU.
2
Press X/x to select “FM MODE.”
3
Press or c.
4
Press X/x to select “MONO.”
• “STEREO”: Stereo reception.
• “MONO”: Monaural reception.
Tuner
FM 10 : 88.00 MHz
FM
Current band and preset number
Current station