Sony STRDG910 - Manual (Page 50)

50 GB
D:\CANNES\SONY_HA\JOB 2007\STR-
DG910\IM_910_CEL\Data_CEL\GB_data\GB04AMP_STR-DG910-CEL.fm masterpage: Left
STR-DG910
3-094-430-31 (1)
Adjusting the equalizer
(EQ menu)
You can use the EQ menu to adjust the tonal
quality (bass/treble level) of the front
speakers.
Select “2-EQ” in the amplifier menus. For
details on adjusting the parameters, see
“Navigating through menus” (page 44) and
“Overview of the menus” (page 45).
EQ menu parameters
x EQ (Equalizer on/off)
• EQ ON
The equalizer is turned on.
• EQ OFF
The equalizer is turned off.
x BASS LVL (Front speakers bass
level)
*
x TRE LVL (Front speakers treble
level)
*
* You can also adjust the front speaker bass and
treble level with TONE MODE and TONE +/– on
the receiver (page 4).
Settings for the surround
sound
(SUR menu)
You can use the SUR menu to select the sound
field you want for your listening pleasure.
Select “3-SUR” in the amplifier menus. For
details on adjusting the parameters, see
“Navigating through menus” (page 44) and
“Overview of the menus” (page 45).
SUR menu parameters
x S.F. SELCT (Sound field
selection)
Lets you select the sound field you want. For
details, see “Enjoying Surround Sound” (page
59).
Note
The receiver lets you apply the last selected sound
field to an input whenever it is selected (Sound Field
Link). For example, if you select “HALL” for the
SA-CD/CD input, then change to a different input
and then return to SA-CD/CD, “HALL” will
automatically be applied again.
x SB DEC (Surround back
decoding mode)
Lets you select the surround back decoding
mode. For details, see “Using the surround
back decoding mode” (page 51).
x EFFECT (Effect level)
Lets you adjust the “presence” of the surround
effect for sound fields selected with the
MOVIE or MUSIC button and for “HP
THEA” sound field.
• EFCT. MIN
The surround effect is minimum.
• EFCT. STD
The surround effect is standard.
• EFCT. MAX
The surround effect is maximum.