Samsung HT-X725G - Manual (Page 27)

ENG
●
CONNECTIONS
AUX2 : Connecting an External Analogue Component
Analogue signal components such as a VCR.
Connect AUX IN 2 (Audio) on the Home Cinema to the Audio Out of the external analogue
component.
Be sure to match connector colours.
Press the AUX button on the remote control to select AUX2 input.
You can also use the FUNCTION button on the main unit.
The mode switches as follows :
DVD/CD  DIGITAL  AUX1  AUX2  USB  OSD IPOD  V/P IPOD  TUNEr.
You can connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks of the VCR
to this product.
OPTICAL : Connecting an External Digital Component
Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box).
Connect the Digital Input (OPTICAL) on the Home Cinema to the Digital Output of the external digital
component.
Press the AUX button on the remote control to select DIGITAL.
You can also use the FUNCTION button on the main unit.
The mode switches as follows :
DVD/CD  DIGITAL  AUX1  AUX2  USB  OSD IPOD  V/P IPOD  TUNEr.
1.
~
.
~
M
`
1.
.
~
Optical Cable
(not supplied)
AUX2 : rear Panel OPTICAL : rear Panel
Audio Cable (not supplied)
If the external analogue
component has only one Audio
Out, connect either left or right.
External Analogue
Component
External Digital Component
HT-X725_GB_ENG_0218.indd 27 2009-02-18 �� 10:33:10