Summer Infant M104 - Manual (Page 9)

DISK MOUNTED HARROW INSTALLATION GUIDE
Disk brackets and Spacer Tubes for M94, M104 and M106 Mounted Harrow
See Pages 2.05 – 2.07 of Whole Goods Catalog for Sections Required
Use one short disk bracket with sections supported by one mounting arm. Use two short disk brackets to
mount a single harrow section across disk center. At locations other than disk center, a combination of brack-
ets and spacers (listed below) are required to attach mounted harrows to an angled implement frame.
Section First Choice Second Choice
Cross Tube
Model Width Length Brckt. 1 Brckt. 2 (C) Distance (D) Brckt. 1 Brckt. 2 (C) Distance (D)
M94 4 ½’ 16” Short Short +3” 8-9” Short Short +2” 7 –7 ½”
M94 6’ 34” Short Short +6” 17-20” Short Short +4” 11 – 14”
M94 7 ½’ 52” Short Long +3” 44 ½ -45” Short Long +2” 41 ½-44 ½”
M104/M106 6’ 23 ½” Short Short +4” 11-14” Short Short +3” 8 – 10 ¾”
M104/M106 8’ 47 ½” Short Long 35 ½-38 ½” Short Short +6” 17 – 20”
M104/M106 10’ 71 ½” Short Long +4” 47 ¾ -50 ¾” Short Long +3” 44 ½-47 ½”
UNIVERSAL DISK BRACKETS
**8H1502 – SPACER TUBE, LATERAL
HIGH CLEARANCE DISK BRACKETS
**8H – SPACER TUBE
Section
Cross Tube First Choice Second Choice
Model Width Length Brckt. 1 Brckt. 2 (C) Distance (D) Brckt. 1 Brckt 2. (C) Distance (D)
M94 4 ½’ 16” Short Short +3” 8-9” Short Short +2” 7 –7 ½”
M94 6’ 34” Short Long 26 ¼ -27” Short Short +6” 17 – 20”
M94 7 ½’ 52” Short Long +4” 38 ½-41 ½” Short Long +3” 35 ½ -38 ½”
M104/M106 6’ 23 ½” Short Short +4” 11 – 14” Short Short +3” 8 – 10 ¾”
M104/M106 8’ 47 ½” Short Long +4” 38 ½-40 ½” Short Long +3” 35 ½-38 ½”
M104/M106 10’ 71 ½” Short Long +6” 44 ¾ -47 ¾” Short Long +4” 38 ½-41 ½”
C) Spacer Tubes W/Hardware 2” = 8H1500 4” = 8H1505
3” = 8H1503 6” = 8H1507
D) Approximate centerline to centerline of Mounting Arms (8H2310) based on 18 degree rear gang angle
6