Sony 3-270-589-12 (1) - Manual (Page 41)

41
Superimposed Text Information
Cha
p
te
r 2
P
repa
ra
ti
ons
Information displayed
a) Only when the system frequency is 60I/30P.
The display shown above corresponds to the factory
default settings of the unit.
You can use DISPLAY CONTROL >DISPLAY INFO
(see page 96) in the setup menu to change the information
shown in the second line.
See page 105 “Setup Menu Operations” in Chapter 6 for
more information about how to use the setup menu.
a Type of time data
If the time data or user bits cannot be read correctly, they
will be displayed with an asterisk. For example, “T*R”,
“U*R”, “T*R.” or “U*R.”.
b Timecode reader drop-frame mark (for system
frequency 60I/30P only)
“.”: Indicates drop-frame mode
“:”: Indicates non-drop-frame mode
c Timecode generator drop-frame mark (for system
frequency 60I/30P only)
“.”: Indicates drop-frame mode (factory default)
“:”: Indicates non-drop-frame mode
d VITC field mark
“ ” (blank): Fields 1 and 3 (for system frequency 60I/30P)
or fields 1, 3, 5 and 7 (for system frequency 50I/25P)
“*”: Fields 2 and 4 (for system frequency 60I/30P) or
fields 2, 4, 6 and 8 (for system frequency 50I/25P)
e Menu setting states
This is displayed when the setup menu item DISPLAY
CONTROL >MENU STATUS is set to “ENABLE” (see
page 96).
f Operation mode
The field is divided into two blocks as shown below.
• Block A displays the operation mode.
• Block B displays the servo lock status or playback speed.
Note
Display Meaning
CNT Counter data
TCR TC reader timecode data
UBR TC reader user bits data
TCR. VITC reader timecode
UBR. VITC reader user bits data
TCG TC generator timecode
UBG TC generator user bits data
IN In point time data
OUT Out point time data
DUR Duration between In point and Out point
Note
T C R 0 0 : 0 4 . 4 7 . 0 7 *
P L A Y L O C K
1 Type of time data
2 Timecode reader drop
frame mark
a)
3 Timecode generator drop
frame mark
a)
4 VITC field mark
5 Menu setting states
6 Operation mode
Time data
Display Description
B1 The current menu settings are the same as the
settings in menu bank 1.
B2 The current menu settings are the same as the
settings in menu bank 2.
B3 The current menu settings are the same as the
settings in menu bank 3.
DF The current menu settings are the same as the
factory defaults.
No
display The current menu settings are different from all
of the above.
Display Operation mode
Block A Block B
DISC OUT Disc is not loaded.
LOADING Disc is being loaded.
UNLOADING Disc is being unloaded.
STANDBY OFF Standby-off mode
STOP Stop mode
NEXT Cuing up to the first frame of
the next clip.
PREV Cuing up to the first frame of
the current clip.
F.FWD Fast forward search
F.REV Fast reverse search
PLAY Playback mode (servo
unlocked)
A B