Shure 565SD - Manual (Page 2)

2
Polar Pattern
Cardioid (unidirectional)-uniform with frequency, symmetrical
about axis
lmpedance
Dual. Microphone rating impedance is 150 ohms (250 ohms ac-
tual) for connection to microphone inputs rated at 19 to 300
ohms and “High” for connection to high-impedance microphone
inputs.
Wired for low impedance as supplied. To change impedance,
see sections on lmpedance Selection and Connections.
Output Level (at 1,000 Hz)
*0 dB = 1 volt per Pascal (1 Pa = 94 dB SPL)
Polarity
Positive pressure on diaphragm produces positive voltage on
pin 2 (with respect to pin 3).
Switch
Built-in magnetic reed on/off switch with lockplate. To lock
switch in the ON position, remove screw on lockplate and turn
lockplate 180 °. Reassemble and tighten screw.
Cartridge Shock Mount
Internal rubber vibration-isolator
Cable
565SD-CN: 6.1 m (20 ft) two-conductor shielded, rubber-jacket-
ed, detachable, with XLR connectors.
Swivel Adapter
Positive action, adjustable through 90 ° from vertical to horizon-
tal, permits easy removal for handheld use, suitable for mount-
ing on stand with
5
/
8
"-27 thread
Case
Chrome-plated die casting with steel mesh grille
Dimensions
Net Weight (less cable)
298 grams (10.5 oz)
CERTIFICATIONS
Eligible to bear CE Marking. Conforms to European EMC Direc-
tive 89/336/EEC. Meets applicable tests and performance criteria
in European Standard EN55103 (1996) parts 1 and 2, for residen-
tial (E1) and light industrial (E2) environments.
FURNISHED ACCESSORY
Swivel Adapter ...................................................... A25D
REPLACEMENT PARTS
Cartridge ...................................................................R65
Screen and Grille ................................................... RS65
Plug Element...................................................... RK169P
OPTIONAL ACCESSORIES
Line Matching Transformer ............................A95 Series
Desk Stand ..................................................S37A, S39A
Isolation Mount....................................................... A55M
Dual Mount............................................................. A26M
Windscreen.............................................. A58WS Series
Cable, LO-Z (7.6 m [25 ft]) ...................................... C25J
Cable, HI-Z (6.1 m [20 ft]) .................................... C20HZ
“L” “H”
Open Circuit Voltage* -56.0 dB
(1.6 mV)
-34.0 dB
(20 mV)
150°
120°
150°
120°
180°
30°
60°
90°
30°
60°
0
90°
–10 dB
–20 dB
–15 dB
–5 dB
150°
120°
150°
120°
180°
30°
60°
90°
30°
60°
0
90°
–10 dB
–20 dB
–15 dB
–5 dB
500 Hz
1000 Hz
125 Hz
400 Hz
8000 Hz
2000 Hz
CARTRIDGE TRANSFORMER XLR CONNECTOR
CODED TERMINAL
IMPEDANCE SELECTION SOCKET
(SHOWN IN LOW IMPEDANCE POSITION)
REED
SWITCH
GREEN
BLACK
YELLOW
GREEN
YELLOW
RED
BLUE
WHITE
BLACK
(2 in.)
51 mm
161 mm
(6 7/16 in.)
23 mm
(15/16 in.)
22 mm
(7/8 in.)
93 mm
(3 11/16 in.)
34 mm
(1 11/32 in.)