SUPER MICRO Computer Supero SC512 - Manual (Page 32)

SC512 Chassis Manual
5-2
5-3 Removing the Chassis Cover
Removing the Chassis Cover
Remove the screws holding the chassis cover in place. 1.
Apply pressure to the middle front of the chassis cover. 2.
Slide the cover toward the rear of the chassis. 3.
Figure 5-1: Removing the Chassis Cover
Warning: Except for short periods of time, do NOT operate the
server without the cover in place. The chassis cover must be in
place to allow proper airflow and prevent overheating.
!
Remove these screws
Remove this screw
Remove these screws
Flat head
M4 x 4 mm
[0.157]
RAIL
Round head
M4 x 4 mm
[0.157]
Flat head
M5 x 12 mm [0.472]
Washer for M5
DVD-ROM CD-ROM FLOPPY DRIVE
Flat head
6-32 x 5 mm
[0.197]
Pan head
6-32 x 5 mm
[0.197]
Round head
3 x 5 mm
[0.197]
Pan head
6-32 x 5 mm
[0.197]
M/B
Flat head
6-32 x 5 mm
[0.197]
HARD DRIVE
Thumb screw
6-32 x 5 mm [0.197]
M/B standoff
6-32 to 6-32
M/B STANDOFF
M/B (CPU) standoff
M5 to 6-32
Round head
2.6 x 5 mm
[0.197]