SUPER MICRO Computer AOC-USAS-S4I - Manual (Page 22)

5-2
Add-on Card User's Guide
5-3 Installing on Windows
To install the driver on Windows:
1 Start or restart the system the New Hardware Wizard opens.
2 After inserting the driver disk, set the wizard to use the driver on the disc and
click Next.
3 Click Next twice to navigate past the license agreements and follow the onscreen
instructions to complete the driver installation.
4 Remove the floppy disk.
5. Restart your computer.
6. Skip to Chapter 6: Managing Your Storage Space.
5-4 Installing on Linux (Red Hat and SUSE)
To install the module on Linux (both Red Hat and SUSE).
1. Insert RAID Installation CD.
2. Mount the Installation CD using the following settings.
Red Hat: mount /dev/cdrom /mnt/cdrom
SUSE: mount /dev/cdrom /media/cdrom
3. Install the module RPM:
rpm -Uvh mount-point/xxx/yyy.rpm
where mount-point is the specific mount point on the Linux system, xxx is the driver
path, and yyy.rpm is the rpm file.
4. Reboot the system.
5. Run fdisk, mkfs, and create mount points for any new disk drives.
6. Skip to Chapter 6: Managing Your Storage Space.