Sony PEG-T415 - Manual (Page 115)

Chapter3 Exchanging and updating data using a HotSync ® operation
115
Advanced HotSync ® operations
5
Adjust the following options as needed.
• Serial Port: Identifies the port for the modem. If you are unsure of the
port assignment, look at the Modem Properties in the Windows
Control Panel.
• Speed: Determines the speed at which data is transferred. Try the “As
Fast As Possible” rate first, and then adjust downward if you
experience problems. This setting allows the Palm Desktop for CLIÉ
software and your CLIÉ handheld to find and use the fastest speed.
• Modem: Identifies the modem type or manufacturer. Refer to your
modem manual or face plate for its type or settings. If you are not sure
of your modem type or your modem does not match any that appear
in the list, select Hayes Basic.
• Setup String: Identifies the setup string for your particular modem.
Not all modems require a setup string. Refer to your modem manual
and enter a setup string if recommended by the manufacturer.
6
Click OK.
Preparing your CLIÉ handheld
Follow the procedures below to prepare your CLIÉ handheld for a modem
HotSync operation.
1
Rotate the Jog Dial navigator to select HotSync and then
press the Jog Dial navigator. Or tap the HotSync
icon on
the Application Launcher screen.
The HotSync dialog box appears.
2
Tap Modem.
Continued on next page