Woodstock SHOP FOX W1687 - Manual (Page 20)

-18-
Df[\cN(-/.=fiDXZ_`e\jD]^%J`eZ\0&((
J<
K
L
G
Once assembly is complete, test run your machine to
make sure it runs properly and is ready for regular
operation.
The test run consists of verifying the following: 1) The
motor powers up and runs correctly, and 2) the safety
disabling mechanism on the switch works correctly.
If, during the test run, you cannot easily locate the source
of an unusual noise or vibration, stop using the machine
immediately, then review
KiflYc\j_ffk`e^ on GX^\*,.
If you still cannot remedy a problem, contact our Tech
Support at (360) 734-3482 for assistance.
Kfk\jkilek_\dXZ_`e\#[fk_\j\jk\gj1
(% Make sure you understand the safety instructions
at the beginning of the manual, and verify that the
machine is setup properly.
)% Ensure all tools and objects used during setup are
cleared away from the machine.
*% Connect the machine to the power source.
+% Verify that the machine is operating correctly by
turning the machine FE.
— When operating correctly, the machine runs
smoothly with little or no vibration or rubbing
noises.
— Investigate and correct strange or unusual noises
or vibrations before operating the machine further.
Always disconnect the machine from power when
investigating or correcting potential problems.
,% Turn the machine F==.
-% Remove the switch disabling key (see =`^li\)').
.% Try to start the machine with the paddle switch.
— If the machine [f\jefk start, the switch disabling
feature is working as designed.
— If the machine [f\j stars, immediately stop the
machine. The switch disabling feature is not
working correctly. Call Tech Support for help.
K\jkIle
=`^li\)'% Removing switch key from
paddle switch.
Gifa\Zk`c\j k_ifne ]ifd k_\ dXZ_`e\
Zflc[ ZXlj\ j\i`flj \p\ `ealip% N\Xi
jX]\kp ^cXjj\j kf i\[lZ\ k_\ i`jb f]
`ealip%