John Deere 655C-ll User Manual
Page 15
15
Multipurpose Bucket
with Bolt-on Teeth
655C-II
755C-II
Capacity heaped (ISO 7546) ................................2.1 cu. yd. (1.6 m
3
)
2.6 cu. yd. (2.0 m
3
)
Breakout force ....................................................24,525 lb. (11 120 kg)
35,283 lb. (16 000 kg)
Static tipping load ...............................................21,226 lb. (9628 kg)
27,684 lb. (12 555 kg)
Maximum clamping force....................................19,147 lb. (8680 kg)
22,473 lb. (10 190 kg)
D
Overall length (with bucket).................................247 in. (6275 mm)
273 in. (6938 mm)
G
Dumping height at 45 degrees – bucket .............107 in. (2716 mm)
118 in. (2997 mm)
G
1
Dumping height at 45 degrees – blade ...............128 in. (3252 mm)
141 in. (3574 mm)
H
Reach at 45 degrees – bucket ............................44 in. (1114 mm)
46 in. (1180 mm)
H
1
Reach at 45 degrees – blade ..............................25 in. (629 mm)
26 in. (656 mm)
I
Maximum digging depth below grade .................7.1 in. (180 mm)
8.3 in. (212 mm)
J
Maximum operating height – bucket open ..........217 in. (5509 mm)
238 in. (6044 mm)
J
1
Maximum operating height – bucket closed........193 in. (4896 mm)
214 in. (5424 mm)
K
Maximum height of hinge pin..............................144 in. (3662 mm)
159 in. (4040 mm)
L
Height of hinge pin, transport position.................20 in. (503 mm)
22 in. (567 mm)
M
Width of bucket...................................................96 in. (2445 mm)
98 in. (2500 mm)
N
Width of opening .................................................48 in. (1215 mm)
51 in. (1285 mm)
Three-Shank Rigid-Type Radial Ripper with ESCO Ripper Tips
Weight ................................................................1,742 lb. (790 kg)✶
2,359 lb. (1070 kg)✶✶
O
Ground clearance below toolbar ..........................6.5 in. (166 mm)
7.9 in. (200 mm)
P
Ripping width ......................................................69 in. (1760 mm)
73 in. (1860 mm)
Q
Toolbar width ......................................................79 in. (1996 mm)
83 in. (2100 mm)
R
Lifting height.......................................................28 in. (712 mm)
30 in. (771 mm)
S
Ripping depth......................................................14 in. (352 mm)
15 in. (385 mm)
T
Additional overall length – raised ........................27 in. (676 mm)
26 in. (660 mm)
T
1
Additional overall length – lowered .....................29 in. (729 mm)
25 in. (635 mm)
U
Distance between teeth.......................................33 in. (850 mm)
35 in. (900 mm)
V
Angle ..................................................................21 degrees
21 degrees
✶When mounting the 655C ripper, the rear 550-lb. (250 kg) counterweight must be removed. Net machine weight change is 1,215 lb. (541 kg).
✶✶When mounting the 755C ripper, the rear 550-lb. (250 kg) and underside 2,205-lb. (1000 kg) counterweights must be removed. Net machine weight change is – 157 lb.
(– 71 kg).
N
H
1
H
J
J
1
K
G
G
1
L
I
O
V
R
S
T
T
1
U
P
Q
D
57
°
45
°
50
°
52
°
40
°
15
°
655C / 755C SERIES II LOADERS WITH MULTIPURPOSE BUCKETS AND
THREE-SHANK RIGID-TYPE RADIAL RIPPERS WITH ESCO RIPPER TIPS