Assembly instruction, Diagram 1 – Impex MCB-849 User Manual

Page 7

ASSEMBLY INSTRUCTION

Tools Required For Assembling the Machine: Two Adjustable Wrenches and Allen
Wrenches. NOTE: It is strongly recommended for two or more people to assemble this
machine to avoid possible injury.

STEP 1

(See Diagram 1)

A.) Attach one Base Frame (#3) to the Rear Base Frame (#2). Attach an Upright Beam (#1)

onto the Base Frame and Rear Base Frame. Secure them together with two M10 x 3
5/8” Carriage Bolts (#32), one 5 ½” x 2” Bracket (#15), two Ø ¾” Washer (#41), and two
M10 Aircraft Nuts (#44) from bottom. Secure with two M10 x 2 ¾” Carriage Bolts (#33),
two Ø ¾” Washer (#41), and two M10 Aircraft Nuts (#44) from side. Do not tighten the
Nuts and Bolts yet. Repeat the same procedure to install the other side.

B.) Securely tighten all Nuts and Bolts.
C.) Insert two Crutches (#4) into the two Upright Beams. Insert two M18 Lock Knobs (#19)

through the selected holes to obtain desired height.

DIAGRAM 1