Iqua Snake 2 - Manual (Page 9)

8
EN
Switching on and off
•
To switch on Snake 2
• Press and hold the button until the blue light starts blinking
• To switch off Snake 2
• Press and hold the button until the lights turn off
Pairing the Snake 2 and your mobile phone
Pairing is the process of linking Snake 2 with your Bluetooth-enabled mobile phone. After this
process is completed, you can use the Snake 2 with this paired mobile phone. If you want to
use the Snake 2 with another mobile phone, you must repeat the pairing process again. Even
though Snake 2 can be paired with up to 8 compatible phones it can only be connected to one
phone at a time.
1. Make sure Snake 2 is charged and turned OFF.
2. Press and hold down both the
button and the button at the same time until you
here a sound and the lights start flashing.
3. Release the buttons. Snake 2 is now in pairing mode waiting for your mobile phone to
contact it.
4. Complete the pairing with your mobile phone. Please refer to the manual of your mobile
phone for details on how to search and pair. When the mobile phone has found the
handsfree device, the phone will show Iqua Snake 2 on its display. In order to pair with the
phone, enter the PIN code of Snake 2, which is 0000.
5. Once pairing has been successful, you will hear a sound and the blue light will start
blinking.