Intellinet Network Solutions PowerLine HD Ethernet Adapter 503839 - Manual (Page 6)

Device Selection
From the drop-down list, select the device you want to configure.
List View
The QoS tab includes two list views to provide simple channel access
priority (CAP) classification for individual MAC addresses and IP ports.
There is a collective limit of eight across both lists. NOTE: No delimiters,
colons or dashes are allowed in the MAC address format.
Priority Mapping
The Priority Mapping group contains both VLAN and ToS bit-mapping
capability. When selected, packets matching the VLAN or ToS Bit
priority will be assigned the PowerLine contention priority (Channel
Access Priority, CAP) as set in the corresponding drop-down box. If a
packet has both VLAN and ToS in it, VLAN will override ToS.
Default CAP
The default CAP group allows for default priority mapping of packets
that do not have a VLAN or ToS bit. Settings are available for Unicast
(directed to a host).
• IGMP (default CAP 3): sets the channel access priority for IGMP
frames (the group management frames, not the stream data).
• IGMP Managed Multicast Stream (default CAP 2): sets the default
channel access priority for stream data belonging to a snooped IGMP
multicast group.
6