Insignia NS-A1200 - Manual (Page 13)

13
Insignia NS-A1200 Car Amplifier
www.insignia-products.com
Bridging two amplifiers
Using your amplifier
Turning on the amplifier
The amplifier automatically turns on a few seconds after you turn your
vehicle’s ignition switch to ACC or ON or turn on your sound system,
depending upon how you wired the system. The POWER indicator on
the top of the amplifier turns on when the amplifier is on.
Note
Your amplifier requires 90 amps or more of power from your
vehicle’s battery during operation. To protect your battery
from discharging to the point that you cannot start your
vehicle, do not operate the amplifier unless your vehicle is
running.
Master amp
Slave amp
Bridged switch:
Master position
Bridged switch:
Slave position
Speaker
impedence:
2
Ω
NS-A1200b.fm Page 13 Monday, May 21, 2007 11:37 PM