Insignia NS-DXA1 User Manual
Quick start guide ns-dxa1, Install remote control battery, Connect to antenna and tv
Quick Start Guide
NS-DXA1
Package contents
Digital-to-analog converter box
Remote control
AAA battery
Coaxial cable
RCA audio/video cable
Install remote control battery
Remove the cover from the back of the remote control, insert the battery as shown,
then replace the cover.
TV
POW
ER
POW
ER
SLE
EP
SAP
MENU
MEN
U
SIGN
AL
DISP
LAY
EXIT
VOL
CH
CCD
FAV
P
A
G
E
MUT
E
ZOO
M
GUID
E
1
2
3
4
5
6
7
8
9
0
RECA
LL
ANTENNA
INPUT
ANTENNA
INPUT
Method 1 (Better)
1
Connect the antenna to the IN (FROM ANT) jack on your converter box using a
coaxial cable.
2 Connect
the
R AUDIO, L AUDIO, and VIDEO jacks on your converter box to the
corresponding jacks on your TV using an A/V cable. TV should be tuned to correct
video source (see your TV documentation).
3 Plug the power cable into a power outlet or surge protector.
This is the preferred method for the best video and audio quality.
Method 2 (Good)
1 Connect the antenna to the IN (FROM ANT) jack on your converter box
using a coaxial cable.
2 Connect
the
OUT (TO TV) jack on your converter box to the Antenna IN jack
on your TV using a coaxial cable. Your TV must be tuned to channel 3. For best
performance with this connection, change the Audio Output option in the
Options menu to Mono. For more information, see “OPTION menu” on page 9 in
your User Guide.
3 Plug the power cable into a power outlet or surge protector.
Converter Box
TV
TV
Converter Box
Connect to antenna and TV
08-1161_NS-DXA1QSG_eng.indd 1
08-1161_NS-DXA1QSG_eng.indd 1
3/8/2008 7:47:04 AM
3/8/2008 7:47:04 AM