Intel Fireface 800 - Manual (Page 36)

36 User's Guide Fireface 800 © RME
19. Configuring the Fireface
19.1 Settings Dialog - General
Configuring the Fireface is done via its own settings dialog. Start the program Fireface Set-
tings. The mixer of the Fireface (TotalMix) can be configured by starting the program Fireface
Mixer.
The Fireface’s hardware offers a number of helpful, well thought-of practical functions and op-
tions which affect how the card operates - it can be configured to suit many different require-
ments.
The following is available in the
'Settings' dialog:
• Input
selection
• Level of analog I/Os
• Configuration of digital I/Os
• Synchronization
behaviour
• State of input and output
• Current sample rate
Any changes performed in the
Settings dialog are applied
immediately - confirmation (e.g. by
exiting the dialog) is not required.
However, settings should not be
changed during playback or record if
it can be avoided, as this can cause
unwanted noises.
Use the drop down menu Properties
For to select the unit to be
configured.
On the right of it the current firmware
and driver version is shown.