ITT AAMM-01 - Manual

AAMM-01
and
Advantage ® Actuator
Maintenance Manual
This manual provides installation and maintenance instructions for ADVANTAGE ® ACTUATOR operated
diaphragm valves. If additional information is required, please contact:
ITT Industries
33 Centerville Road
Lancaster, PA 17603
(717) 509-2200
Attention: Sales Department
WARNING
ITT INDUSTRIES VALVES AND VALVE ACTUATORS ARE DESIGNED AND
MANUFACTURED USING GOOD WORKMANSHIP AND MATERIALS, AND
THEY MEET ALL APPLICABLE INDUSTRY STANDARDS. THESE VALVES ARE
AVAILABLE WITH COMPONENTS OF VARIOUS MATERIALS, AND THEY
SHOULD BE USED ONLY IN SERVICES RECOMMENDED IN OUR PRODUCT
CATALOG OR BY A COMPANY VALVE ENGINEER.
MISAPPLICATION OF THE PRODUCT MAY RESULT IN INJURIES OR PROP-
ERTY DAMAGE. A SELECTION OF VALVE COMPONENTS OF THE PROPER
MATERIAL CONSISTENT WITH THE PARTICULAR PERFORMANCE REQUIRE-
MENT, IS IMPORTANT FOR PROPER APPLICATION.
EXAMPLES OF THE MISAPPLICATION OR MISUSE OF ITT INDUSTRIES
VALVES INCLUDE USE IN AN APPLICATION IN WHICH THE PRESSURE/TEM-
PERATURE RATING IS EXCEEDED OR FAILURE TO MAINTAIN VALVES AS
RECOMMENDED.
IF VALVE EXHIBITS ANY INDICATION OF LEAKAGE, DO NOT OPERATE.
ISOLATE VALVE AND EITHER REPAIR OR REPLACE.
CONTENTS:
1.0 Advantage ® Installation
2.0 Advantage ® Operation & Adjustment
3.0 Advantage ® Maintenance
4.0 Advantage ® Accessories
4.1 Travel (Closing) Stop Adjustment
4.2 Manual Over-Ride (Open) and
Adjustable Opening Stop
4.3 Manual Over-Ride (Close) and
Adjustable Opening Stop
5.0 Switch Pack 2.0
6.0 Switch Pack 2.5
7.0 Switch Pack 3.0
8.0 Positioner
TABLES:
1. Fastener Torques
2. Actuator Travel and Weights
3. Actuator Internal Data
4. O-Ring Sizes
FIGURES:
1. Actuator Drawings
2. Accessories:
- Travel Stops
- Manual Over-Ride (Open) with
Adjustable Opening Stop
- Manual Over-Ride (Close) with
Adjustable Opening Stop
3. Switch Pack 2.0
3A. Switch Pack 2.5
3B. Switch Pack 3.0
4.
Positioner
5. Valve Diaphragm Identification
6. PTFE Diaphragm Detail
7. Advantage Assembly & Disassembly Fixture
Pure-Flo
®
Dia-Flo
®