InStep RIDE N STRIDE - Manual (Page 2)

2
IMPORTANT
Read and follow these Safety Rules and Assembly Instructions before operating your trailer/stroller.
If you have any questions concerning the safe use of this product, contact InSTEP, LLC at
1-800-242-6110, M-F, 8:00am - 5:00pm CST or visit our web site at www.instep.net or Email
us at [email protected] before using.
Qty. Description
1 Allen Head Wrench (4mm)
2 1 ⁄ 4 " x 2 1 ⁄ 4 " Allen Head Machine Screw
2 1 ⁄
4
" Nylon Locknuts
2 1 ⁄
4
" Washers
2 Plastic Nylon Bushings
1 Complete Frame and Fabric
2 20" Rear Wheels
Qty. Description
1 8" Front Wheel Assembly
1 Front Wheel Mounting Pin
1 Handle Bar with 2 Quick Release Pins
1 Wrist Strap
1 Two-in-One Canopy and Raincover
1 Safety Flag
IMPORTANT!
Tires are shipped uninflated. Please inflate to 30-35 PSI.
Don’t Go Back to the Store! We appreciate your purchase of one of our many fine products.
We are sure that you will be satisfied with your selection. We regret that although great care
and effort have been taken, occasionally problems may occur. To ensure prompt and correct
handling of any problems, or to answer any questions, please contact us on our Toll-Free
Customer Service Number listed below. Service will be quicker if you have your model number
(found on carton) and assembly instructions ready when calling. If neither are available, please
know the model name which is usually printed somewhere on the product.
If you have any questions concerning the safe use of this product, please call InSTEP at:
1-800-242-6110
Press “1” for Customer Service and then “2” to speak with a representative.
Step 1. Fabric seat and canopy can be hand washed
with mild soap and a damp cloth or sponge
and then air dry.
Step 2. After one hour of use, recheck all fasteners
to make sure they are secure.
Step 3. Periodically recheck all fasteners.
RIDE N STRIDE TRAILER PARTS LIST
MAINTENANCE AND CLEANING