Function setup, Connection speed p, 10base half – Integra E5SF1UD User Manual
Page 54: 10base full, 100base half, 100base full, Bd-live setting g, Limited allow, Prohibit, Set the connection speed to “10base half
54
EN
FUNCTION SETUP
3-a) Use [
K /L] to select “Proxy Address”, then press
[Enter]. Proxy address setting screen will appear.
Enter proxy address.
• The keyboard screen will appear.
Others
Proxy Address
_
1
3
4
5
6
7
8
9
0
a
b
c
d
e
f
g
h
i
j
k
l
m
n
o
p
q
r
s
t
u
v
w
x
y
z
.
-
_ OK
2
3
4
5
6
7
8
9
0
a
b
c
d
e
f
g
h
i
j
k
l
m
n
o
p
q
r
s
t
u
v
w
x
y
z
.
-
_
OK
3
4
5
6
7
8
9
0
a
b
c
d
e
f
g
h
i
j
k
l
m
n
o
p
q
r
s
t
u
v
w
x
y
z
.
-
_
OK
OK
2
3
4
5
6
7
8
9
0
a
b
c
d
e
f
g
h
i
j
k
l
m
n
o
p
q
r
s
t
u
v
w
x
y
z
.
-
_ OK
OK
a/A/@
All Clear
Clear
[
K /L/ s / B] : Move the highlight.
[the Number buttons] : Enter number.
[Enter] : Enter the highlighted number / word.
[A] : Clear the entered number or word.
[B] : Clear all the entered numbers or words.
[C] : Switch between abc ? ABC ? @!?
[D] : Set the entered number or word.
3-b) After you enter proxy address correctly, press [D].
• Confirmation message will appear. Select “Yes” to
complete the settings.
Others
Is Setting OK?
xxxxx
No
Yes
Proxy Address
3-c) Use [
K / L] to select “Proxy Port”, then press
[Enter]. Proxy port setting screen will appear. Enter
proxy port number with number buttons.
Others
Please select the input Proxy Port.
then press ‘ENTER’.
xxxxx
Proxy Port
3-d)
After you enter proxy port correctly, press [Enter].
4
Press [Return] to go back to the previous
screen, or press [Setup] to exit.
Note
• The range of input numbers for the port number is
between 0 and 65535. (If you enter a number larger
than 65535, it will be regarded as 65535.)
• For proxy port, the selected ports may be blocked and
not be able to use depending on your network
environment.
• Connection Speed
p
You can set connection speed as your preference. (The
default setting is “Auto”.)
1
Follow steps 1 to 4 in “Connection Test”
on page 52.
2
Use [
K/ L] to select “Enable(Custom)”,
then press [Enter].
3
Use [
K/ L] to select “Connection Speed”,
then press [Enter].
4
Use [
K/ L] to select the desired setting,
then press [Enter].
“Auto”:
Set the appropriate connection speed automatically, in
accordance with your network environment.
“10BASE Half”:
Set the connection speed to “10BASE Half”.
“10BASE Full”:
Set the connection speed to “10BASE Full”.
“100BASE Half”:
Set the connection speed to “100BASE Half”.
“100BASE Full”:
Set the connection speed to “100BASE Full”.
5
Press [Return] to go back to the previous
screen, or press [Setup] to exit.
Note
• Choose a connection speed in accordance with your
network environment.
• The network connection may be disabled depending
on the device, when the settings are changed.
• BD-Live Setting
g
You can limit Internet access for BD-Live discs.
(The default setting is “Allow”.)
1
Follow steps 1 to 4 in “Connection Test”
on page 52.
2
Use [
K/ L] to select “Enable(Custom)”,
then press [Enter].
3
Use [
K/ L] to select “BD-Live Setting”,
then press [Enter].
4
Use [
K/ L] to select the desired setting,
then press [Enter].
“Allow”:
Internet access is permitted for all BD-Live contents.
“Limited Allow”:
Internet access is permitted only for BD-Live contents
which have content owner certificates. Internet access
without the certificates is prohibited.
“Prohibit”:
Internet access is prohibited for all BD-Live contents.
5
Press [Return] to go back to the previous
screen, or press [Setup] to exit.