beautypg.com

InFocus IN42ff User Manual

Page 9

background image

8

If you are using a desktop computer and want to see the image on your
computer screen as well as on the projection screen, plug the monitor cable
to the Monitor out connector on the projector.

You can control the projector from an LCD control panel, touch screen, or
other control device or computer by connecting an RS-232 cable to the pro-
jector’s Serial Control connector. Specific RS-232 commands can be found
in the Service and Support section of our website and in the Appendix.

The projector can be managed by networking software through its Network
(RJ-45) connector. Detailed instructions on this feature can be found on our
website.

connect monitor cable

connect RS-232 cable

connect CAT-5 cable

Network

EDX Ref Guide.fm Page 8 Friday, June 30, 2006 10:48 AM