IMC Networks FAIL-SAFE MOR-F-632-120-EB82 User Manual
Page 27
23
E1 Port Verification
By placing a physical loopback connection on the E1 port, a valid signal can be
detected by each individual E1 port to verify its operation. Without the fiber looped,
the ALARM LED for the looped E1 port will show RED/GREEN indicating there is a
problem at the far end of the fiber transport (In this case the far end unit is missing)
and the STAT LED is RED because the fiber is in LOS. With the fiber looped, the E1
port will only show a normal GREEN STAT LED.