InSinkErator FAUCET - Manual (Page 4)

The wall outlet for your faucet must have power supplied to it continuously
and must be fused. It should not be controlled by the same wall switch
that operates a food waste disposer.
PREPARATION
START HERE
PROPER INSTALLATION SHOULD TAKE ABOUT 2-4 HOURS
■ ■
Identify locations for the faucet and
tank.
■ ■
Check to make sure there is proper
clearance for faucet handle to be fully
opened.
■ ■
Check to make sure counter is not
too thick.
■ ■
Make sure there is a grounded
electrical outlet under the sink.
■ ■
Turn off water supply.
■ ■
If using the sink sprayer hose hole,
remove nut that connects sprayer
hose at bottom of faucet.
■ ■
Using adjustable wrench, remove nut
connecting sprayer washer flange in
sprayer hole.
■ ■
Plug hose opening with either a 1/8"
plug or a 1/4" cap (not supplied).
1
A
B
4
Consult a professional before drilling into
a surface other than stainless steel.
C
What if you don’t have a sprayer hole or
don’t want to use it?
■ ■
If drilling a hole into a stainless steel
sink or counter top, you can cut a
mounting hole for the faucet with a
hole saw for stainless steel, or you can
use a hole punch. Required Hole Diameter
1 1 ⁄
4
" - 1 1 ⁄
2
"
Required minimum from
center of hole to wall
Maximum counter
thickness (depth)
2 "
1 1 ⁄
2
"