Insignia 10-0499 - Manual (Page 12)

8
NS-L7HTV
www.insigniaproducts.com
Understanding the basics
Turning your TV on or off
To turn your TV on or off:
• Slide the POWER switch.
Selecting the input mode
To select the input mode:
1 Press INPUT to open the Input Source list, then
press INPUT repeatedly or press or to select
an input source.
2 Press OK/ENTER.
Automatically scanning for TV channels
You should scan for TV channels in your area. Your
TV stores the information in the channel list.
To automatically scan for TV channels:
1 Make sure that you have a TV antenna, cable TV,
or satellite TV connected to your TV.
2 Press SCAN on the front of your TV. The
following screen opens.
Status
POWER switch
position POWER ON/CHG
indicator
On Blue
Off Off
Charging Red
Note
Because your TV can be powered by the built-in,
rechargeable battery, there is no standby mode. Your
TV is either on or off.
POWER switch
POWER ON/CHG
indicator
Note
• You can press TV to watch TV.
• You can press VIDEO to select a connected
video device.
• You can press FM to listen to the radio.
Input Source
VIDEO
RADIO
TV
Select OK:Confirm Menu:Exit
Do you want to proceed auto scan?
Yes No