Integra MZA-4.7 - Manual (Page 26)

26
Programming Using IMC (Integra Music Center)—Continued
■ Preset Programming
Preset programming effects all zones on the MZA-4.7. There are six momentary preset buttons – Preset 1 - Preset 6.
These presets are stored in the MZA-4.7, and may be setup using the IMC setup window.
Left mouse click over “Set up preset 1” and change any MZA-4.7 function i.e. On status, volume level, source selection,
even bass, treble etc. If Preset 1 is required to effect changes to the other zones on the MZA-4.7, then either change the
main window’s zone or open other IMC main window instances and make the required changes, then left click over the
“Default” selection to exit. Preset 1 is now programmed and will be set to the programmed preset states whenever the
MZA-4.7 receives the preset 1 IR control string, or RS232 command.
The process is the same for all other presets.
The Preset may be re-named – Right click on the Preset button in IMC’s main window: Opens the name edit window.
Enter the new text and click OK to save and exit.
The name is also added next to the “Set up preset” in the Preset Setup Window.
■ Page Preset
Left click the “Force page preset” and make changes to zone settings in IMC’s main window. Click “Default” to save
and exit.
If a door bell sound has been uploaded to the amplifier, then it may be optionally included in the preset by clicking the
“Sound” tab. All zones will be automatically set to input S8.
Whenever a contact across the PG and 0V terminal is closed the amplifier will assume the programmed states, and if
“Sound” was selected the uploaded wav file will be played in a continuous loop for the duration of the contact closure.
When the contact opens the amplifier reverts to its previous settings.
■ Alarm Clock Programming
An alarm clock event may be included in a preset.
In the Preset Setup window left Click a spare “Set up preset” – for this example Preset 6 is selected.
Left click the “Alarm Enable” in the Schedule panel.
Select the required time and days that the Alarm is to operate and change all the required settings in IMC’s main window
i.e., which zones are ON, their volume and source selection etc.
Left click the “Default” selection to save and exit.
The preset 6 command will then be invoked at 6:15 in the morning Monday - Friday.
To turn the alarm clock off select “Setup Preset 6” and in the Preset Schedule panel de-select the Alarm Enable. Left
click the “Default” selection to save and exit.
Preset Setup Window