Iluv IMM9400 - Manual (Page 13)

iLuv | 24 iMM9400/9500 | V10M10_IM_EN_060509 23 | iLuv
Memory Card and USB Operation
CARE AND MAINTENANCE GUIDE
Playing MP3/WMA audio files from SD/MMC memory cards or USB Devices
1. Press MODE repeatedly or SD Card or USB until the main
display shows “ “, for SD card or “ ” for USB.
2. Insert the SD or MMC flash memory card or USB flash
containing MP3/ WMA audio files into the card slot by gently
pressing into position until it locks in place. Cards and USB
devices can only be inserted one way.
3. After reading the card or USB, the unit will play automatically.
4. Press to pause playback.
5. Press or to skip tracks.
6. Press or to skip folders (albums).
7. Press MP3 INFO to display title, album and artist information.
· Playback will continue until the last track has played and
then the display will again show the total number of tracks,
albums on the card.
8. Press FM MODE/ to stop playback at any time, the display
will show the total number of files tracks and directories albums
on the card. For example “08” folders (albums), “49” tracks.
· Treat the disc carefully. Handle the disc only by its edges. Never allow your fingers to contact with
the shiny, unprinted side of the disc.
· Do not attach adhesive tape, stickers etc., to the disc label.
· Clean the disc periodically with soft, lint-free, dry cloth. Never use detergents or adhesive
cleaners to clean the disc. If necessary, use a CD cleaning kit.
· If disc skips or gets stuck on a section of the disc, it is probably dirty or damaged (scratched).
· When cleaning the disc, wipe in straight lines from the centre of the disc to the edge of the disc.
Never wipe in circular motions.
· To remove a disc from its storage case, press down on the centre of the case and lift the disc outs,
holding it carefully by the edges.
· Fingerprints and dust should be carefully wiped off the disc’s recorded surface with a soft cloth.
Unlike conventional records. compact disc have no groove to collect dust and microscopic debris,
so gently wiping with a soft cloth should remove most particles.
CLEANING THE UNIT
· To prevent fire or shock hazard, disconnect your unit from the AC power source when cleaning.
· The finish on the unit may be cleaned with a dust cloth and cared for as other furniture, Use caution
when cleaning and wiping the plastic parts.
· If the cabinets become dusty wipe them with a soft dry dust cloth. Do not use any wax or polish
sprays on the cabinets.
· If the front panel becomes dirty or smudged with fingerprints it may be cleaned with a soft cloth
slightly dampened with a mild soap and water solution. Never use abrasive cloths or polishes as these
will damage the finish of your unit.
Caution: Never allow any water or other liquids to get inside the unit while cleaning.