Iomega 03798300 User Manual
Page 9
9
Installation
Guide
Determining your computer’s configuration
Once you have located the IDE channels, determine the configuration of
the IDE/ATAPI devices that are connected to your computer. Steps 2a
through 2c show some possible ways that your computer might be
configured.
If the hard drive is the only IDE device connected...
The hard drive is usually connected to the primary IDE channel. If the hard
drive is the only IDE device connected, the secondary IDE channel will be
unused, as shown in the illustration below. With this configuration,
connect the Zip drive to the secondary IDE channel as the master device.
For instructions see the section entitled
Installing the Zip drive as the
only device on the secondary IDE channel
on page 17 of this manual.
Secondary IDE Channel
Hard Drive
Primary IDE Channel
Continued on next page …
2
2a